Service; Accessories; Warranty - Dustcontrol DC Tromb 400c Manual Original

Service

The machine must be switched off and unplugged for
cleaning and maintenance. Fluids should not come
into contact with the motor.
The fi ne fi lter should be changed at least once per
year. Use only original spare parts. The microfi lter/
HEPA fi lter, should be changed every 300 running
hours. Use breathing protection during a fi lter chan-
ge. The operation should be performed in a closed
area. Used fi lters should be sealed in a plastic sack
and disposed of properly.
Check regularly that the electrical cable is not da-
maged.
The DC Tromb 400 should be performance tested
at least once per year because it may be used with
hazardous materials. Worn parts must be replaced.
Never compromise the function of the DC Tromb 400,
use only original spare parts.
For vacuum motor the typical average life of the
original brushes is 600 - 700 hours. They can then

Accessories

Description
Coupling socket
Coupling socket
Hose std Ø=50 per mtr
HEPA fi lter
Fine fi lter, polyester,
with integrated fi lter cover
Fine fi lter cellulose

Warranty

The warranty period for this machine is two years
and covers manufacturers faults. The warranty is
valid under the condition that the machine is used
under normal conditions on the task for which it was
designed and is maintained properly. Normal wear
is not covered by this warranty.
2017-10-09
be exchanged or complete motor/fan replaced. For
2nd brush set life is ca. 400 hours and for 3rd brush
set ca. 300 hours. After that the commutator is worn
out and the motor needs to be replaced.
Part no Description
2107
Plastic sack, 50 pieces
2129
Intellibag, 10 pieces/roll
2401
Fold bag longopac
44016
44017
44043
Other accessories — see Dustcontrol catalogue.
Service performed by other than Dustcontrol or its
authorized agent voids automatically the warranty.
No other warranty express or implied is applicable.
DC Tromb 400a/c/L- 16
Part no
4314
43619
432177
Part No 9480-F