American Standard Avery 1180SB3020SS Instrucciones De Instalación página 5

5A
APPLY SEALANT
For Flush Mount Sinks:
Clean the sink apron and top rim of all debris.
Ensure that the surface on underside of countertop
and around the countertop cutout opening is smooth
and free of debris. Flush mount installation requires a
generous bead of sealant around the sink apron where
sink and countertop will meet.
5B
APPLY SEALANT
For Under Counter Sinks:
Clean the sink apron and top rim of all debris.
Ensure that the surface on underside of countertop
cutout opening is smooth and free of debris. Under
counter installation requires a generous bead of
sealant around the sink top rim where sink and
countertop underside will make contact.
6
INSTALL COUNTERTOP
Carefully position and install the countertop. Ensure the sealant provides a complete seal between the sink and
the countertop surface. Fill any voids and wipe excess away with soft damp cloth.
7
ASSEMBLE AND INSTALL P-TRAP AND DRAIN CONNECTIONS
Assemble and install P-trap drain connections in accordance with
manufacturer's instructions. Connect trap to drain assembly hand tight
to check alignment. It may be necessary to cut off part of the tailpiece
(area "B") or part of the horizontal leg of the trap (area "C"). Secure
joints for watertight assembly.
NOTE: P-trap, drain connections and faucet are not included.
APPLY SEALANT
THREE SIDES
TOP OF CABINET
APPLY SEALANT
ON TOP THREE
SIDES OF RIM
TOP OF CABINET
- 5 -
C
B
791598-101