Pre-Set Function; Memory Function - Teka MW 34 SILVER REFLEX Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Note:
If half the grill time pass ,the oven stop and beep twice. This is normal. You
should turn the food over.If there is no operation in 1 minutes,the oven
will continue working and beep once.
17. COMBINATION COOKING (microwave + grilling)
(1) Press the " GRILL/COMBI." button twice or thrice to choose
"Combination 1" (55%microwave+45%grill) or "Combination 2"
(36%microwave+64%grill), LED will display "C-1" or "C-2", "
"
" will light.
(2) Set the cooking time, the maximum cooking time is 99 minutes and 99 seconds.
Example: Set 12 minutes 50 seconds, press "1", "2", "5", "0" in order.
(3) Press "
" to start cooking. The cooking time counts down, ":",
"
" and "

18. PRE-SET FUNCTION

(1) Set the clock first. (Consult the instruction of clock setting.)
(2) Set a certain cooking procedure(one or two blocks), the setting method and display are
the same as relevant cooking procedure. (Defrosting is beyond pre-set cooking).
Example: If you want to cook the food with 100% microwave power for 10 minutes.
Do it as following:
a. Press "POWER" once to choose 100% microwave power;
b. Press number keys "1","0","0","0" in order to adjust the cooking time;
c. Be careful! Please do not press "
(3) Press "
" to display current time and hour figure is flashing, the icon
" : " keep lighting on.
(4) Press number keys to input the cooking time.For example: to set the time is 12:12, you
can press the number keys "1","2","1","2" in order.
(5) Press " AM/PM " to choose AM or PM. AM or PM will be selected in turn by pressing
the button of " AM/PM " continuously.
(6) Press "
" to confirm the preset procedure.When it is confirmed, the
unit will go back the clock states.
(7) When time arrives, the buzzer will sound twice and the cooking starts.

19. MEMORY FUNCTION

(1)Press "MEMORY" to choose memory 1-5 procedure. The LED will display 1,2,3...5.
(2)If the procedure has been set, press "
the procedure. Only one or two stages can be set.
(3) After finishing the setting, press "MEMORY" to save the procedure and turn back to the
waiting states.If press "
" will flash.
" ,it can save and operate the setting.
" to start cooking.
" to use it. If not, continue to set
52
" and

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido