GRAPHITE 59G402 Manual De Instrucciones página 10

TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
DETAILED SAFETY RULES (ELECTRIC CUTTERS AND SHEARS FOR METAL SHEET)
Before switching the tool on make sure there is no contact with material to be processed and processed
material is securely fixed.
Make sure there are no electric wires in the cut area before cutting. Cutting a live wire may cause
electric shock.
Hold the tool firmly in closed hand before switching the tool on and during operation.
Do not touch moving parts of the tool.
Do not put the tool aside before it stops completely.
To replace cutter, first switch the tool off with the switch and wait until it stops working, then disconnect
the tool from mains socket.
Make sure there is enough space under processed material to operate the tool before starting to work.
Always keep the power cord away from moving parts of the tool.
When you see unusual behaviour of the tool, smoke or hear strange noises, immediately switch off the
tool and remove the plug from mains socket.
To ensure proper cooling during tool operation keep the ventilation holes unobstructed.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used,
nevertheless there is always a small risk of injuries at work.
CONSTRUCTION AND USE
Sheet metal shears are hand tool with insulation class II. It is driven with a single-phase AC commutator
motor whose rotary movement is transformed to reciprocating movement. The power tool is designed for
sheet metal cutting without producing chips. It allows making straight and curved cuts. The tool is designed
for cutting metal sheets made of soft steel, stainless hard steel, copper steel and aluminium steel.
Range of use covers repair and building works, and any work from the range of individual, amateur activities
(DIY).
Use the tool according to its purpose only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1. Switch
2. Chip shield
3. Adjustment screw
4. Bottom cutter
5. Upper cutter
6. Upper cutter screw
7. Bottom cutter screw
8. Base fixing screw
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
SHEET METAL SHEARS
59G402
DETAILED SAFETY REGULATIONS
10