To View Performance Data In Time Of Day Mode; Time Of Day Mode Example - Timex W-188 Manual De Instrucciones

After initial use, the Watch will automatically correct any time
inaccuracy upon activation of the GPS-3D Sensor and every 15
minutes thereafter.

TO VIEW PERFORMANCE DATA IN TIME OF DAY MODE

When using Fitness Sensors with your Watch, scroll through
performance data by pressing and releasing DISPLAY.
Performance data viewing options for Time of Day Mode include:

Heart Rate: Current heart rate (requires HR Sensor).

Speed: Current velocity (requires GPS-3D Sensor).

Pace: Current velocity, expressed in minutes per selected
distance unit, such as miles or kilometers (requires GPS-3D
Sensor).

Distance: Distance traveled since the activation of the GPS-3D
Sensor (requires GPS-3D Sensor).
22
Press to view
performance data
Performance data

Altitude: Current elevation above sea level (requires GPS-3D
Sensor).
NOTE: If the Watch does not detect either Fitness Sensor, the
day of the week shows on the bottom line of the display.
You can continue viewing the day of the week while using
the Fitness Sensors by hiding performance data (for data
hiding information, see "Watch settings" on page 64). If
you choose Day of Week, it will appear as though the
Watch does not receive any data.

Time of Day Mode example

Assume that you live in San Francisco and work with a client in
Singapore. Like all busy people, it is imperative you keep track
of time, so you set T1 to your local time. But it is also important
to have a quick reminder of your client's time, so you set T2 to
Singapore time. With both time zones available, you can quickly
check your client's time or even switch your monitor to display
T2 when you travel to Singapore.
23