Connecting The Units; Power Cable Connection Diagram - Pioneer DEH-P88RS Manual Del Usuario

Connecting the Units

Power cable connection diagram

Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
Cap (1*)
When not using this terminal, do
not remove the cap.
Yellow (3*)
Back-up
(or accessory)
Red (5*)
Accessory
(or back-up)
ISO connector
Note:
In some vehicles, the ISO connector may be
divided into two. In this case, be sure to connect
to both connectors.
3
1*
3* 2*
5* 4*
Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
Red (4*)
To electric terminal controlled by
ignition switch (12 V DC)
ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Connect leads of the same
color to each other.
Yellow/black
If you use an equipment with Mute function, wire
this lead to the Audio Mute lead on that equipment.
If not, keep the Audio Mute lead free of any
connections.
15 cm
Antenna jack
Fuse holder
(10 A)
Fuse resistor
Fuse resistor