Zoom ADSL X6V Inicio Rápido página 5

message: Wireless network detected. Click here for available networks.
Click the message area. When you see the list of network
connections, go to step 2.
• If your computer has wireless networking capability that's not
activated or is unable to detect other network connections, follow
the manufacturer's instructions for activating the connection, then
go to step 2.
• If your computer does not have wireless capability, you must install
a wireless network adapter (such as a USB adapter). Follow the
installation instructions that came with it, then use the adapter's
configuration application to locate available networks in your area.
2
Select zoom from the list of available network connections.
3
Open your Web browser and go to a familiar Web site. If you can
access the site, the wireless connection is working.
4
Set up wireless security for your network.
Setting Up Wireless Network Security
We recommend that you use Wired Equivalent Privacy (WEP) 64-bit
security, which works with most 802.11 wireless equipment. The X6v also
®
supports WiFi Protected Access™ (WPA™) and WPA2™ but this
improved security is more difficult to set up. If you want to use WPA or
WPA2, see the Zoom ADSL X6v User Guide on the X6v CD for instructions.
Note: If your computer has a previously-configured wireless network
connection, we suggest that you follow the sequence described here,
making changes to the security settings based on your network security
needs and preferences.
For example, if you are replacing an existing wireless router with the X6v,
you might want to retain the security settings that you currently use on your
network. Enter the SSID, encryption type, and security key or passphrase
that you previously defined. Type a dash (–) between each pair of characters
in the security key.
1
Open your Web browser and type
address field.
in your browser's
http://192.168.0.1
5