Zoom ADSL X6V Inicio Rápido página 6

2
When the authentication dialog opens, type user in the User Name field
and password in the Password field, as shown here:
User Name: user
Password: password
Note: The User Name (user) and Password (password) that you type in this
dialog are used by the Zoom Configuration Manager and must be typed as
shown, using lower-case characters. These identifiers are not the user name
and password that your Internet Service Provider might have given you nor
are they names that you choose.
You can safely ignore the warning message in this dialog. It is for
informational purposes only.
3
Click OK.
4
On the ADSL Setup page, click the Wireless Setup icon
the screen.
5
When the Wireless Setup page opens, type a new name for your
network in the SSID field; for example, type sarahsecure. Do not type
zoom as the SSID.
6
Normally, you should not change the Hide SSID and Default Channel
settings.
7
In the Encryption field, select WEP-64 bit from the drop-down menu.
In response, the Configuration Manager displays six new fields
directly below the Encryption field. The additional fields (Passphrase,
Default Key, Key1, Key2, Key3, and Key 4) define some security settings
that will be used when accessing the wireless network that you
created in step 5.
6
at the top of