Sony PDBK-104 Instrucciones De Instalación página 23

3
Make the following settings on page P2 of the function menu.
• Set TCG to "SDI".
• Set TC MODE to "REGEN".
Synchronizing with video input timecode to the
SDSDI INPUT connector
1
Input an SDSDI signal containing VITC to the SDSDI INPUT
connector.
2
Make the following settings on page HOME of the function menu.
• Set V INPUT to "SDSDI".
3
Make the following settings on page P2 of the function menu.
• Set TCG to "EXT".
• Set TC MODE to "REGEN".
• Set TC/VITC to "VITC".
Synchronizing with video input timecode to the
COMPOSITE INPUT connector
1
Input a composite signal containing VITC to the COMPOSITE
INPUT connector.
2
Make the following settings on page P1 of the function menu.
• Set V INPUT to "COMPOSIT".
3
Make the following settings on page P2 of the function menu.
• Set TCG to "EXT".
• Set TC MODE to "REGEN".
• Set TC/VITC to "VITC".
Overview 23