Synchronizing The Internal Timecode Generator To The External Signal - Sony PDBK-104 Instrucciones De Instalación

VIDEO CONTROL [Video]: Setting
related to video control
INPUT UP
CONVERT
[> IN UP
conv]:
Specify
upconvert
output of the
input signal.
1) Auto squeeze mode supports the wide flag signal of VBID (Video Blanking ID) or WSS.
Synchronizing the internal timecode generator to
the external signal
22 Overview
AUTO SQUEEZE
[>> Auto
SQZ]: Select
whether to use
auto squeeze
1)
mode.
CONV MODE [>>
Conv mode]:
Select the
conversion
mode.
DETAIL GAIN
[>> Detail]:
Select the gain
level of the
upconverter
image
enhancer.
INPUT BLANK [>>
IN blank]
Synchronizing with SMPTE RP188 LTC to the SDSDI
INPUT connector
1
Input an SDSDI signal containing SMPTE RP188 LTC to the
SDSDI INPUT connector.
2
Make the following settings on page HOME of the function menu.
• Set V INPUT to "SDSDI".
Description
* OFF [>> OFF]: Do not use.
ON [>> ON]: Use.
* EDGE CROP [>> Edge Crop]: Edge crop
mode
LETTER BOX [>> LetterBox]: Letter box
mode
SQUEEZE [>> Squeeze]: Squeeze mode
* LOW [>> Low]: Low
MID [>> Mid]: Mid
HIGH [>> High]: High
For a system frequency of 60i or 30P
(when the recording format is HD)
OFF [>> OFF]: Do not blank lines 20 and
284.
* ON [>> ON]: Blank lines 20 and 284.
For a system frequency of 50i or 25P
(when the recording format is HD)
OFF [>> OFF]: Do not blank lines 23 and
336.
* ON [>> ON]: Blank lines 23 and 336.