Filling The Filling Chamber - STORZ & BICKEL Mighty Modo De Empleo

8 . F I L L I N G T H E F I L L I N G C H A M B E R
Turn the Cooling Unit with a 90° rota-
tion counterclockwise in order to re-
move it from the Vaporizer.
Removal of Cooling Unit (with Mouthpiece)
Always fill the Filling Chamber com-
pletely up to the plastic rim with ground
plant material. Do not compress the
plant material too much so that the
airflow is not unnecessarily impeded.
Remove any excess plant material left
around the filling aperture so that it is
clean and allows the Cooling Unit to be
fitted.
If the Filling Chamber is only
partially filled, then the vapori-
zation material may shift
around; the hot air then bypasses the
vaporization material, so that no va-
porization can occur.
Filling Chamber properly filled
If the Filling Chamber is not to be filled
completely, it is recomended to place
the included Drip Pad over the herbs,
and then mount the Cooling Unit on the
Vaporizer.
Filling Chamber partially filled, with Drip Pad
placed on top
53