Heating Up - STORZ & BICKEL Mighty Modo De Empleo

7. C O M M I S S I O N I N G A N D O P E R AT I O N
The battery can also be
charged via the optional 12
Volt car charger. Connect the
12 Volt car charger to the power socket
of the Vaporizer and then plug into the
cigarette lighter or suitable 12 V sock-
et. Charge and complete the operation
in the same way as with the power
adapter (Chapter 7.1. "Charging the
Battery", page 49).
Connecting the Vaporizer using the power
adapter or the 12 Volt car charger
Batteries are specially assem-
bled consumable items that
can only be replaced by Storz
& Bickel when the MIGHT Y Vaporizer
is sent in to them.
Any attempt by the customer to re-
place the battery by him/herself is
potentially dangerous and leads to
loss of any claims under the warranty
and exempts Storz & Bickel from any
liability.
Mains Operation
The MIGHT Y Vaporizer can also be
operated with the power adapter, even
when the batteries are completely
discharged. Proceed as described in
Chapter 7.1. "Charging the Battery",
page 49 and then connect up the
Vaporizer.
Automatic Switching Off
The automatic switching off is used to
save battery capacity so that the Va-
porizer can be used as long as possible
without charging.
The device switches off automati-
cally two minutes after the last press
of a button or the last application. The
switching off of the Vaporizer is indi-
cated by a short vibration.
A short press of the ON/OFF
switch during operation can
reset the automatic switching-
off to two minutes.

7.2. Heating Up

The MIGHT Y Vaporizer provides two
temperature levels that are set in the
factory: The basic temperature at
180°C (356°F) and the booster tem-
perature at 195°C (383°F).
Switch on the device (heating up the
Vaporizer with full Filling Chamber and
Cooling Unit mounted is recommend-
ed). To do this, press the orange ON/
OFF switch for at least half a second.
The Vaporizer responds with a short
50