Application - STORZ & BICKEL Mighty Modo De Empleo

Mount the Cooling Unit on the Vaporiz-
er and heat up. This ensures that both
the Filling Chamber and the material
to be vaporized are preheated and the
vaporizing can begin as soon as the
heating process is completed.
Caution! Hot surface!
After using the MIGHT Y Va-
porizer, do not touch the Fill-
ing Chamber until it has cooled down
again.
Once the Vaporizer has reached the
set temperature (set and actual tem-
peratures are the same, also signaled
by a short double vibration) and the
Mouthpiece is folded out, the inhaling
process can then begin.
Using the MIGHTY Vaporizer
Take the Mouthpiece between the lips,
and inhale slowly and evenly for sev-
eral seconds.
9. A P P L I C AT I O N
Please note the following about va-
por generation: the more intense the
vapors, the greater the impairment of
the flavor.
es from the concentration of the aro-
mas and fragrances.
In this case, the temperature should
be lowered, so that the intensity of the
vapors is reduced.
on the density, the vapor could irritate
respiratory tracts or lungs, which can
lead to coughing.
exhale slowly. It is advisable to deliber-
ately concentrate on your breathing
process.
After vaporization, turn off the
MIGHT Y Vaporizer. To do this, press
the orange ON/OFF switch for at least
half a second. The Vaporizer acknowl-
edges the switching off with a short
vibration.
Pull the power adapter (if it is used)
from the socket and disconnect from
the Vaporizer.
Allow the Vaporizer and the power
adapter to cool down before they are
packed away.
56
A very high intensity (density)
of the vapor can lead to irrita-
tion of the respiratory passag-
The device is not to be used, if
the user has respiratory tract
or lung conditions. Depending
Inhale only half of air you can
normally manage. Hold your
breath for a few seconds and