Tabla de contenido
Publicidad
Install the network link
You have different options for installing the network link:
•
A: via an optical fiber or RJ45 cable connected to the SFP module (with a respective
connector) in the SFP slot.
•
B: via an RJ45 cable connected to the fixed RJ45 connector.
•
C: via both of the above, in which case connection via the SFP module functions as the
primary network link and connection via the fixed RJ45 connector as the fail-over link.
For more information on network connector locations, see Connectors on page 36.
Note
• SFP module is not included. For more information on available SFP modules, see
www.axis.com
• Establishing a network link only via the optical fiber cable using the respective SFP module
works as a stand-alone solution for long range cabling installations.
Install the illuminator kit
WARNING
• Risk of electric shock. Make sure the power supply is disconnected.
• Emission of infrared light (risk group 2) from the illuminators can be harmful for eyes.
Pay attention to the provided indications. To reduce the risk of eye damage, avoid eye
exposure, and use appropriate shielding or eye protection at distances of less than
1.5 m (4.9 ft).
CAUTION
During normal operation, the surface of the illuminator can reach high temperatures. Do
not allow direct contact and position the appliance where it is inaccessible to unauthorized
AXIS Q8685-LE PTZ Network Camera
27
EN
Publicidad
Tabla de contenido
