Publicidad
Idiomas disponibles
Idiomas disponibles
load bikes
Release a strap
end by pressing
the red button.
If you have purchased
other Yakima
long wheel tray products:
IF YOUR BIKE DOES NOT HAVE SAFETY TABS:
Pay close attention when using the skewer;
the bike's forks must be secured with EXTREME TIGHTENING
of the lever (refer to step 33).
Lock the lever with
the silver-toned keys.
1032445C-5/18
Set the bicycle forks
vertically onto the skewer.
Prevent damage to your forks!
Use the long
wheel tray kit.
REST THE REAR WHEEL
INTO THE TRAY.
With lever open, tighten the nut
until the lever closes with
FIRM resistance.
TEST YOUR INSTALLATION!
If forks can move in the mount, open the
lever and tighten the nut again.
• Follow instructions for long wheel tray product.
• When tightening hex key, spacer must be flat
against tray and bar bracket.
FORKS WITHOUT
SAFETY TABS
Rotate wheel tray to
accommodate bike wheel.
Tighten the hex key.
Your bike's forks are secure
ONLY after the lever
closes with solid
resistance.
Forks with
Safety Tabs
SECURE THE REAR
WHEEL.
Insert strap end
behind red button.
Pull the strap tightly
against the wheel rim.
Publicidad
