GYS PACK OBD Manual De Instrucciones página 6

Translation of the original instructions
SAFETY INSTRUCTIONS
This manual includes guidelines on the operation of your device
and the precautions to follow for your own safety. Ensure it is read
carefully before first use and keep it handy for future reference.
These instructions should be read and understood before anyone
operates the product. Any modifications or maintenance that
are not specified in the manual should not be undertaken. The
manufacturer is not liable for any injury or damage due to non-
compliance with the instruction manual. In case of problems or
uncertainties, please consult a qualified person that is able to
handle the device correctly. This device should only be used
for memory backup within the limits indicated on the device
and manual. The safety instructions must be followed. In case
of improper or unsafe use, the manufacturer cannot be held
responsible.
This device may be used by children from age 8 and by persons
with reduced physical, sensory or mental capabilities or lack
of experience and knowledge, provided that they are under
supervision or have been told how to use the device safely and
are aware of the potential risks. Children must not use the device
as a plaything. Cleaning and servicing tasks may not be carried
out by children unless they are supervised.
Do not use for charging non-rechargeable batteries
Do not operate the device with a damaged power supply cord
or a damaged mains plug.
Never charge a frozen or damaged battery.
Do not cover the device
Do not place the device near a fire or subject it to heat or to
longterm temperatures exceeding 50°C
Risk of explosion or acid splashing if the clamps are short-
circuited or if the 12V booster is connected to a 24V vehicle or
vice versa.
Risk of explosion and fire!
A battery being charged can emit explosive gas.
• During the charge, the battery must be placed in a well
• Avoid flames and sparks. Do not smoke.
• Protect the electrical contacts of the battery against short-
Acid projection hazard!
• Wear safety goggles and protective gloves.
6
ventilated area.
circuiting.
GYSPACK OBD EN