Removing The Doors - GE 20 Serie Manual Del Propietario E Instalación

REMOVING THE DOORS

IMPORTANT NOTES
NOTE: Door swing is not reversible.
• Read the instructions all the way through before
starting.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid
using them in the wrong places.
• Provide a non-scratching work surface for
the doors.
IMPORTANT: Once you begin, do not move
the cabinet.
These instructions are for removing the doors.
Unplug the refrigerator from its electrical outlet.
Empty all door shelves, including the dairy
compartment.
TOOLS YOU WILL NEED
Adjustable Wrench
Masking Tape
Phillips Screwdriver
Installation Instructions
(Double Door Refrigerator Models only)
3/8" and 10 mm Socket
Ratchet/Driver
Thin-blade Screwdriver
REMOVE THE REFRIGERATOR DOORS
1
Tape the doors shut with masking tape.
A
(for water dispenser models)
B
Start with left-hand door first: Remove the
screw securing the center hinge cover, lift the
hinge cover and place to the side on top of the
refrigerator.
(for water dispenser models)
C
Remove water coupling and power coupling.
C1
C2
C3
Pull apart
power coupling
to disconnect
27
Remove hinge cover
(1 Phillips screw)
Water Coupling
Remove the metal
spring clip. Use a
screwdriver to push
the red plastic locking
clip down and off.
Water Coupling
Push red collar
and hold.
Pull tube.
Power Coupling
Black mark
flush with
collar assembly