Nuna ZAAZ Manual De Instrucciones página 13

Assemble Footrest onto Seat
1 Slide down the lock behind the flap and lift the flap completely.
The seat automatically rises up to its highest position.
2 Attach the footrest on one side of the flap and then flex the footrest
to attach it on the other side.
3 Lower the flap down into position. Listen for the click as the lock
clicks back into position.
Assemble Seat Cushion onto Seat
First remove the tray, the safety bar and the harness restraint if necessary,
then place the seat cushion onto the seat.
Assemble Harness Restraint onto Seat
WARNING When used as a high chair, the child must always wear the
harness restraint correctly fitted and adjusted. The chair complies with the
high chair European standard (EN14988-1/-2:2006+A1: 2012) only when the
harness is fitted.
1 Insert waist clips into the lower backrest holes (around the seat
cushion, when cushion in use) and listen for a click.
2 Insert shoulder harness clips into the upper backrest holes and listen for
( 5 )
click.
3 Insert the remaining crotch clip (through the seat cushion, when
cushion in use) into the inner of two holes in the sitting surface of the
seat and listen for a click.
4 Check that the harness attachment is secure by pulling on each
attachment point.
10
( 4 )
( 5 )
( 2 )
( 5 )