Nuna ZAAZ Manual De Instrucciones página 16

2 Unhook the two ends from the backrest and remove.
Remove the Harness Restraint
WARNING When used as a high chair, the child must alwats wear the
harness restraint correctly fitted and adjusted. The chair complies with the
high chair European standard (EN14988-1/-2:2006+A1: 2012) only when the
harness is fitted.
The harness can be removed for cleaning or when the chair is used for an
older child.
Insert the Nuna key into each of the slots of the harness restraint
at the back and underside of the seat to release the plastic clips.
Pull on the belts to remove.
Remove the Seat Cushion
To remove the seat cushion, first remove the tray, the safety bar and
the harness restraint if necessary.
Remove the Footrest
1 Slide down the lock behind the flap and lift the flap completely.
The seat automatically rises up to the highest position.
2 Firmly flex one end of the footrest and unhook it from the flap.
Unhook the other end and remove it.
3 Remember to lower the flap and listen for the click as the lock
clicks back into position.
( 11 )
( 4 )
( 6 )
( 2 )
13