Publicidad
Idiomas disponibles
Idiomas disponibles
ACCEPTANCE CHECK
Make sure that the drive cabinet has been transported vertically, otherwise it could be
damaged.
Before installing the cabinet or equipment, check that:
- the equipment has not been damaged during transport,
- the information on the nameplate is compatible with the power supply.
RECOMMENDATIONS
• The cabinet must be fixed to a flat, even floor. For cabinets equipped with climate control
the recommended flatness tolerance is 4 mm every 2 m. The floor must be solid enough to
withstand the weight of the electrical equipment. A minimum distance of 1 m must be left for
access to the front face of the cabinet.
• We recommend placing the cabinet in a well-lit location (200 lux minimum).
• Each door has a locking system (capable of being opened using a tool, it must be kept
locked with a key).
PACKAGING
There are two possible types of packing:
- SEI4C maritime packaging
- slatted packaging
10
HANDLING INSTRUCTIONS
The packaging materials used may vary depending
on the type of transport. Here is the list:
Raw material
Plywood or wood chip
Raw wood products
Anti-static film
Heat-shrink envelope
Material: Polyester
Strapping
Wrap-around carton and
reinforcements
Corner protections
Material: Polyester
Corner protection
adhesive
Material: Acrylic co-poly-
mer + paper
Foam
Material: Polyethylene
Method of recycling
possible
Recycling or disposal
Recycling or disposal
Recycling or disposal
Recycling or disposal
Recycling or disposal
Recycling or disposal
Recycling or disposal
Recycling or disposal
Recycling or disposal
Handling instructions
3919 en - 2019.02 / e
Publicidad
