General Power Tool Safety Warnings - Stanley FATMAX FME380 Manual Del Usuario

Intended use
Safety instructions

General power tool safety warnings

Your Stanley Fat Max FME380 Compact multi-material saw
has been designed for lengthways and crossways
sawing of wood, chipboard, plywood, aluminium, tiles,
stone, plastic and lightweight construction materials held
This tool is intended for professional and private, non profes-
Warning! Read all safety warnings and all
instructions listed below may result in electric
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains
operated (corded) power tool or battery operated (cordless)
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark
b. Do not operate power tools in explosive atmospheres,
or dust. Power tools create sparks which may ignite the
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified plugs
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
c. Do not expose power tools to rain or wet conditions.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
@
in a fixed position. It is intended for making short cuts only.
sional users.
instructions. Failure to follow the warnings and
shock, fire and/or serious injury.
power tool.
areas invite accidents.
such as in the presence of flammable liquids, gases
dust or fumes.
and matching outlets will reduce risk of electric shock.
if your body is earthed or grounded.
Water entering a power tool will increase the risk of
electric shock.
electric shock.
suitable for outdoor use reduces the risk of electric shock.
(Original instructions)
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
3. Personal safety
a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal
protection. Protective equipment such as dust mask,
used for appropriate conditions will reduce personal
c. Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
energising power tools that have the switch on invites
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
e. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
b. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
c. Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
electric shock.
power tool while you are tired or under the influence
injury.
b. Use personal protective equipment. Always wear eye
non-skid safety shoes, hard hat, or hearing protection
injuries.
Carrying power tools with your finger on the switch or
accidents.
rotating part of the power tool may result in personal injury.
unexpected situations.
can be caught in moving parts.
reduce dust-related hazards.
the job better and safer at the rate for which it was
designed.
the switch is dangerous and must be repaired.
starting the power tool accidentally.
ENGLISH
7