Electrical Safety - Stanley FATMAX FME380 Manual Del Usuario

ENGLISH
Vibration
Labels on tool
Health hazards caused by breathing dust developed when
The declared vibration emission values stated in the technical
data and the declaration of conformity have been measured
in accordance with a standard test method provided by
EN 60745 and may be used for comparing one tool with
Warning! The vibration emission value during actual use of
the power tool can differ from the declared value depending
When assessing vibration exposure to determine safety
using power tools in employment, an estimation of vibration
exposure should consider, the actual conditions of use and the
operating cycle such as the times when the tool is switched off
Warning! To reduce the risk of injury, the
This product is not to be used by children
10
Injuries caused when changing any parts, blades or ac-
u
cessories.
Injuries caused by prolonged use of a tool. When using
u
any tool for prolonged periods ensure you take regular
breaks.
Impairment of hearing.
u
u
using your tool (example:- working with wood, especially
oak, beech and MDF.)
another. The declared vibration emission value may also be
used in a preliminary assessment of exposure.
:
on the ways in which the tool is used. The vibration level may
increase above the level stated.
O
measures required by 2002/44/EC to protect persons regularly
way the tool is used, including taking account of all parts of the
and when it is running idle in addition to the trigger time.
The following pictograms. along with the date code, are shown
on the tool:
user must read the instruction manual.
Wear safety glasses or goggles.
Wear ear protection.
Wear a dust mask.
under 16.
No Hands Zone - Keep fingers and arms
away from rotational saw blades.
(Original instructions)
Features
Assembly

Electrical safety

Warning! Laser radiation.
Do not view the laser beam directly with
supply corresponds to the voltage on the rating
manufacturer or an authorised Stanley Fat Max Service
10. Trigger lock and shoe release button
11. Ventilation slots
read this manual carefully and understand all the content prior
to assembly and operation
Wear gloves when handling saw blades.
#
optical instruments.
This tool is double insulated; therefore no earth
wire is required. Always check that the power
plate.
If the supply cord is damaged, it must be replaced by the
u
Centre in order to avoid a hazard.
This tool includes some or all of the following features.
1. Trigger On/Off switch
2. Cutting depth scale
3. Clamp for setting cutting depth
4. Lower guard
5. Parallel guide adjustment knob
6. Parallel guide
7. Footplate
8. Clamping flange
9. Blade bolt
12. Laser sight
13. Connection for dust extraction
14. Spindle-lock button
15. Hex key
16. Diamond saw blade
17. Hardened steel saw blade
18. TCT saw blade
19. Dust extraction hose
20. Line-of-cut indicator
Check for damage to the tool, parts and accessories which
may have occurred during transportation. Take some time to