Uline H-9608 Manual De Instrucciones página 2

NOTE: Recommended mounting height is 52"
from floor to bottom of dispenser.
NOTE: Ensure that proper mounting hardware
is used for appropriate wall composition as
enclosed hardware may not be compatible
with wall surface.
1. Insert metal key all the way into lock opening on
top of dispenser and rotate clockwise until the cover
opens. (See Figure 3)
2. Open dispenser cover and hold dispenser to ideal
mounting place on wall. (See Figure 4)
3. Mark four holes on the wall where screws will be
inserted. (See Figure 5)
4. Drill into wall at marked locations with 1/4" drill bit.
(See Figure 6)
5. Hold dispenser to wall so holes in dispenser align
with previously drilled holes in wall. Insert wall
anchors and screws.
PAGE 2 OF 9
MOUNTING
Figure 3
Figure 4
Figure 5
Recommended
Figure 6
Mounting
Locations
1021 IH-9608