Uline H-9608 Manual De Instrucciones página 3

1. Open dispenser cover completely. (See Figure 7)
2. Push a roll of product into the holders and release
when the core becomes engaged. Ensure that the
paper feeds from beneath the roll. (See Figure 7)
Figure 7
1. When the main roll reaches a diameter of
approximately 3" it may be used as a stub roll.
Remove the main roll from the upper roll holders by
pushing it into the dispenser and locking it onto the
lower roll holders. (See Figure 9)
2. Repeat step three of loading instructions.
PAGE 3 OF 9
LOADING
3. Drape the paper between the black and white
rollers and close the cover firmly until it locks.
(See Figure 8)
4. Use lever to begin dispensing.
STUB ROLL LOADING
1-800-295-5510
uline.com
Figure 8
Figure 9
1021 IH-9608