Edit pages
Selecting and setting the parameters for
dynamics and pickup modeling effects
Use the C and D buttons to select an effect.
Use the Value dial to set the parameters.
Selecting amp modeling effects
Use the C and D buttons to select an effect.
The Value dial will be disabled.
The number/value display will indicate "Gt" if you
have selected a guitar model. The display will indi‐
cate "bA" if you have selected a bass model.
Setting the gain [GAIN] (distortion amount) and
mid-range frequency [MIDFREQ] for the selected
amp model
The C and D buttons will be disabled.
Use the Value dial to set the value.
24