Uline H-1811 Manual Del Usuario

H-1811
PLASTIC DOLLY
TOOL NEEDED
1/2" Socket Wrench
Deck x 1
Figure 1
Figure 2
PAGE 1 OF 3
1-800-295-5510
uline.com
Steel Bar x 2
Flange Nut x 16
ASSEMBLY INSTRUCTIONS
Maximum Capacity: 1,200 lbs. (544 kg.)
PARTS LIST
Rubber Pad x 2
Bolt x 16
Locknut x 4
Figure 3
CAUTION! DO NOT overtighten.
DO NOT use power tools.
1. Insert both steel bars into the deck. (See Figure 1)
2. Secure four swivel casters to the deck with bolts
and flange nuts. (See Figure 2)
3. Place two rubber pads into deck as shown.
Insert pad braces into middle groove of each pad
and secure with locknuts. (See Figure 3)
Para Español, vea página 2.
Pour le français, consulter la page 3.
Swivel Caster x 4
Pad Brace x 4
0521 IH-1811