Basic Configuration; Search And Save Of The Connected Systems - Airzone AZXCSMASTER Manual De Instalación Y Usuario

3.3. Basic configuration

3.3.1. Search and save of the connected systems

First time SuperMaster controller is powered supply you should seek the installed systems
(Fig. 5). To achieve it, do as follows:
1) On the home screen, menu
search has concluded, the SuperMaster will proceed to the next step.
2) The option menu
verification (Fig. 6). To achieve this, follow the next steps: Pressing on
SuperMaster will display information on the screen. Once inside the menu
to exit. Information displayed is as follows:
 Detected systems number: The screen shows you the total number of detected
systems. Pressing on
return to the previous menu.
 Connected systems address and associated control group: It represents the
selected system's information. The left side digit indicates the consulted system's
address (blinking). The right side digit indicates the total number of the system's
zones (fixed). The SuperMaster allows you to select up to 8 different control groups
(Z1-Z8). Use the arrows
want to change the control group, press on Z1, and the 8 control groups will appear.
Press on the requested group control. Once all systems are configured, press
 Associated zones address: It indicates the address of the associated zone with
the selected system. The left side digit indicates the consulted system's address
(fixed). The right side digit indicates the address of the zone associated with the
system (blinking). Use the arrows


allows you to display the information detected by the controller for
to continue, otherwise, press
to finish or press
Fig. 5
appears. Press on
Fig. 6
button, system information is available. Press
to navigate between the different systems. If you
to return to the previous step.
for consulting the zone's address. Press
to return to the previous menu.

to start the search. Once the
button,

, press
to
27