Prodigy VOICE Manual Del Propietário página 35

PRODIGY Voice® Blood Glucose Meter
Important:
solution mode so that the test result will not be
stored in the meter memory.
STEP 4: Apply Control Solution
1. Check the expiration and discard dates on
your control solution and test strip vials.
2. Shake the control solution bottle well, then
remove cap.
3. Squeeze the bottle and discard the first drop
then wipe the dispenser tip with clean tissue
paper or cotton.
4. Squeeze the bottle again to
get a second drop onto a
clean, non-absorbent surface
or on your clean fingertip.
See Figure 19.
5. Bring the tip of the test strip
to touch the drop of solution
until the meter beeps.
Be sure that you are in control
Owner's Manual
Figure 19
35