Performing A Blood Glucose Test; Preparing The Lancing Device - Prodigy VOICE Manual Del Propietário

PRODIGY Voice® Blood Glucose Meter

Performing a Blood Glucose Test

Preparing a Lancing Device
STEP 1: Remove the cap of the
lancing device by twisting it off.
See Figure 23.
STEP 2: Insert a sterile lancet into
the lancet holder of the lancing
device and push down firmly until
lancet is fully seated. Do not twist
the lancet. See Figure 24.
STEP 3: Remove the protective
cap from the lancet by twisting it
and then save it for later use.
See Figure 25.
STEP 4: Replace the cap onto the
lancing device. Screw the cap
until it is snug but not too tight.
STEP 5: Set the lancing level.
The adjustable tip offers five (5)
levels of skin penetration. To select
the desired depth, twist the
Owner's Manual
Figure 23
Figure 24
Figure 25
Figure 26
39