Spare Parts/Accessories; Technical Data - 3M PELTOR ComTac XPI MT20H682FB Serie Manual Del Usuario

EN
5:4 Microphone protection
To protect the boom speech microphone from humidity and dirt,
use microphone protector HYM1000. For attaching the protector,
see Fig. F.
5:5 WEEE (Waste Electrical and Electronic Equipment)
symbol
Following requirement applies in the European Union.
Do NOT dispose your product as unsorted municipal
waste! The crossed-out wheeled-bin symbol indicates that
all EEE (Electrical and Electronic Equipment), batteries and
accumulators must be disposed of according to local law by the
use of available return and collection systems.

6. TECHNICAL DATA

6:1 Standard and approval
3M Svenska AB hereby declares that this 3M™ PELTOR™
ComTac XPI Headset is in compliance with the essential
requirements and other provisions set out in the appropriate
directives. Thereby it fulfils the requirements for CE marking.
A copy of the declaration of conformity and additional information
required in the directives can be obtained by contacting 3M
in the country of purchase. For contact information, see last
pages of this user instruction. The product has been tested and
approved in accordance with EN 352-1:2002,
EN 352-4:2001, EN 352-6:2002.
This product contains electrical and electronic components
and must not be disposed of using standard refuse collection.
Please consult local directives for disposal of electrical and
electronic equipment.
Notified Body Statement of Opinion offered by:
FIOH, Finnish Institute of Occupational Health, Topeliuksenkatu
41 a A, FI-00250, Helsinki, Finland. Notified body #0403.
6:2 Explanation of the attenuation data tables (Fig. G)
1. Model designation
2. Frequency (Hz)
3. Mean attenuation (dB)
4. Standard deviation (dB)
5. Assumed Protection Value, APV
6. Weight (g)
6:3 Explanation of the table electrical audio input level (Table H)
1. Input signal level U (mV, RMS)
2. Mean sound pressure level (dB(A))
3. Sound pressure Standard Deviation (dB)
4. Input signal level for which the mean plus one standard
deviation equals 82 (dB(A))
6:4 Explanation of the table criterion levels (Table I)
Criterion level is the sound pressure level in dB(A) of the noise
environment resulting in 85 dB(A) effective to the ear while
wearing the hearing protectors. Three different criterion levels
are defined related to the frequency content of the noise.
H = criterion level for high-frequency noise.
M = criterion level for medium-frequency noise.
L = criterion level for low-frequency noise.

7. SPARE PARTS/ACCESSORIES

3M™ PELTOR™ HY68 SV Hygiene kit
Replaceable hygiene kit. Replace at least twice a year to ensure
constant attenuation, hygiene and comfort.
3M™ PELTOR™ HY100A Single-use protectors
Single-use protector that is easy to fit to the ear cushions.
3M™ PELTOR™ HYM1000 Microphone protector
Moisture and wind-resistant tape that protects the speech
microphone.
3M™ PELTOR™ M41/2 Wind protection for the microphones
Wind protection for the microphones.
3M™ PELTOR™ HY450/1 Head Pad
To be used for small size range fitting for foldable headbands.
Important Notice
3M does not accept liability of any kind, be it direct or conse-
quential (including, but not limited to, loss of profits, business
and/or goodwill) arising from reliance upon any information
herein provided by 3M. The user is responsible for determining
the suitability of the products for their intended use. Nothing in
this statement will be deemed to exclude or restrict 3M's liability
for death or personal injury arising from its negligence.
10
GB