GENERAL DESCRIPTION
1. Body
2. Container for spices
3. On/Off switch
4. Thickness of grinding regulation
TECHNICAL DATA
- power supply: AAA batteries, 6 pcs.
Batteries do not pose the grinder's
equipment
OPERATING
The grinder is intended for pepper
grinding. Grinding of other spices makes
guarantee terminated.
POWER SUPPLY
The grinder is powered with AAA
alkaline batteries (1.5V).
In order to fix of replace worn batteries, open the cover (1) by twisting it anti-clockwise and
raising it carefully. Insert the batteries as per directions given. Put the cover (1) back and turn
clockwise to lock it.
Used batteries should be thrown away the containers specially designed for this purpose.
Spice grinding
Access to spices tank is provided after open the cover (1) and pulling out battery chamber.
After filling the tank with spices, insert battery chamber and fox the cover (1). Mill is activated
by pressing and holding the button (3).
It is recommended to keep the spices tank 80% full.
In the lower part of the appliance there is thickness regulation available. To set desired
thickness of grinding, twist the regulator (4) clockwise (fine particles) or anti-clockwise (thick
particles).
Do not change the grinding thickness when the grinder is operating.
Avoid humidity. Do not grind the pepper directly over evaporating plates since humidity may
cause clogging of the appliance and damages to the drive.
CLEANING AND MAINTENANCE
- do not merge the unit in water
- clean the casing with a wet cloth
User's Manual for
ELECTRIC PEPPER MILL MP3
1
2
6
3
photo 1
4
photo 2