dESCRIPTION
1. Stop nut
2. Body
3. Pepper bay (P)
4. Salt bay (S)
5. Base
A. Adjustment of salt grinding
B. Adjustment of pepper grinding
USING ThE GRINdER
The MP16 grinder is intended for grinding pepper and salt. Grinding
other spices will void the guarantee.
GRINdING SPICES
To fill in the grinder with spices, remove the stop nut (1), and then slide
out the body (2). Put the spices in their bays:
• Pepper in the bay (3) marked "P"
• salt in the bay (4) marked "S"
With the bays filled up, replace the body (2) and hold it with the stop
nut (1).
To start grinding, hold the base (5) with one hand and rotate the upper part (2) with the other hand,
as marked:
• to grind pepper: clockwise
• to grind salts: counter-clockwise
Grinding is adjusted with the base knobs (Fig. 1).
• Knob A: adjustment of salt grinding
• Knob B: adjustment of pepper grinding
For convenience, the grinder parts are coloured. White is for the knob (A), grey is for the knob (B).
Do not adjust the grinder when in use. Prevent penetration of moisture into the unit.
CLEANING ANd MAINTENANCE
do not immerse the device in water
the housing should be wiped with a damp cloth
ENVIRONMENTAL PROTECTION
the device is made from material that can be reused or recycled, it should be handed over to the
appropriate disposal point that deals with the collection and recycling of electrical and electronic
equipment.
INSTRUCTION MANUAL
PEPPER AND SALT GRINDER MP16
B
A
Fig. 1
EN
1
2
3
4
5
Fig. 2
•
EN
7