Ethernet Connection - Zyxel P-335 Plus Guia De Inicio Rapido

Note: If you were given Internet access settings, enter them in the following fields. Otherwise leave the
default settings and just click Next.

Ethernet Connection

A Select Ethernet as your WAN connection type.
B Select Get automatically from your ISP if your ISP did not assign you a fixed IP address. Skip to C.
Or
Select Use fixed IP address provided by your ISP to give the P-335 Plus a fixed, unique IP address. Go to
B1.
B1 If you select Use fixed IP address provided by your ISP, enter a WAN IP address, WAN IP Subnet Mask
and the neighboring device's IP address given by your ISP.
If you were given DNS server settings, enter them in the fields. Otherwise leave the default settings and
just click Next.
C Select Factory Default to use the factory assigned default MAC address.
D Select the check box to have the P-335 Plus apply bandwidth management to traffic going out through the P-
335 Plus's WAN or LAN port according to the traffic type. Click Apply to save your changes.
ENGLISH
7