FALL SAFE S-LINE VERTIX SYSTEM Manual De Instalación página 20

INSTALLATION MANUAL
Connecting to the anchor line.
FS680 S-Line Grab Kit can be used only in combination with a FALL SAFE® "S-Line Vertix"
guided type fall arrester including a rigid anchor line.
One-way safety system. The device is equipped with the one-way safety system which when
the device is turned upside down, prevents the locking cam from opening, this reducing the risk
of the incorrect insertion on the cable. Warning: Risk of death! The device only works in one
direction. If it is installed incorrectly or in the wrong direction, the risk of death is present
Function test. Slide the fall arrest device upwards; passing it via the connector to verify it slides
freely. Then pull the device quickly downwards, to verify that the fall arrester will immediately
block on the cable.
1 2 3 4 5
FALL SAFE® 19