Technical Data - Skil F0150516 Serie Manual Original

Cross-line laser
INTRODUCTION
• The measuring tool is used for determining and
checking horizontal and vertical lines as well as for
indicating inclines
• With the two vertical laser lines that run at a 90° angle,
right angles can be indicated and checked (e.g. when
dividing up spaces)
• The measuring tool is suitable exclusively for operation
in enclosed working sites
• This tool is not intended for professional use
• Save these instructions for future reference and
include them with the measuring tool when giving
it to a third party

TECHNICAL DATA

Working range to approx.
Levelling accuracy
Self-levelling range
Levelling time
Operating temperature
Storage temperature
Relative humidity (max.)
Laser class
Laser type
Tripod mount
Batteries (included)
Operating life time (approx.)
Weight
Dimensions (length x width x height) 97 x 65 x 120 mm
TOOL ELEMENTS 1
A Battery lid
B Latch of battery lid
C On/Off button / Mode button
D Exit opening for laser beam
E Automatic levelling indicator
F Switch for automatic levelling / locking the levelling unit
G Laser viewing glasses*
H Tripod*
J Tripod mount 1/4"
* NOT STANDARD INCLUDED
SAFETY
• All instructions must be read and observed in
order to work safely with the measuring tool 2
• Never make warning signs on the measuring tool
unrecognisable
• The use of other operating or adjusting
equipment or the application of other processing
methods than those mentioned here can lead to
dangerous radiation exposure
• Do not direct the laser beam at persons or
animals and do not stare into the direct or
reflected laser beam yourself, not even from a
• If laser radiation strikes your eye, you must
0516
• Do not make any modifications to the laser
• Have the measuring tool repaired only through
• Do not allow children to use the laser measuring
• Do not operate the measuring tool in explosive
EXPLANATION OF SYMBOLS ON TOOL
2 Read the instruction manual before use
10 m
3 Laser radiation / Do not stare into beam / Class 2
±0.5 mm/m
± 4°
4 Do not dispose of electric tools and batteries together
6 seconds
-10°C to 40°C
USE
-10°C to +70°C
90%
• Inserting/replacing the batteries
2
650 nm, <1 mW
1/4"
4 x AA (LR6) 1.5V
15 hours
0,5 kg
• On/off
• Operating modes
5
distance (you could blind somebody, cause accidents
or damage your eyes) 3
deliberately close your eyes and immediately turn
your head away from the beam
equipment
qualified specialists using original spare parts
(this ensures that the safety of the measuring tool is
maintained)
tool without supervision (they could unintentionally
blind other persons or themselves)
environments, such as in the presence of
flammable liquids, gases or dusts (sparks can be
created in the measuring tool which may ignite the dust
or fumes)
laser product
with household waste material
- alkali-manganese batteries are recommended for
the measuring tool
- do not use rechargeable batteries
- to open the battery lid A, press on the latch B and
fold the battery lid up
- insert 4 x AA/LR06 batteries (pay attention to correct
polarisation)
- always replace all batteries at the same time
- only use batteries from one brand and with the
identical capacity
- remove the batteries from the measuring tool
when not using it for extended periods (when
storing for extended periods, the batteries can
corrode and self-discharge)
- to switch on the measuring tool, press on/off button
C (immediately after switching on, the measuring
tool sends a laser beam out of both exit openings D)
! do not point the laser beam at persons or
animals and do not stare into the laser beam
yourself, not even from a large distance
- to switch off the measuring tool, press on/off button
C repeatedly until indicator E goes out
- slide switch F into position 6 to lock the levelling unit
- do not leave the switched on measuring tool
unattended and switch the measuring tool off
after use (other persons could be blinded by the
laser beam)
- when not using the measuring tool, switch it off in
order to extend the battery life
- all modes can be selected WITH automatic levelling
(position 5) and WITHOUT automatic levelling
(position 6)