Crisper And Crisper Cover - Haier HBP08GNA Manual Del Usuario

English

Crisper and Crisper Cover

To remove and install the crisper: (see fig. # 6))
1. Gently lift the front of the crisper.
2. Grip the crisper firmly and slide out completely.
3. Replace the crisper by gently sliding it back into place.
fig. # 6
To remove the crisper cover: (see fig. # 7)
1. First remove both crispers.
2. Gently push upward from the underside of the crisper cover to remove.
3. Carefully grasp the crisper cover and slide out to remove.
fig. # 7
To replace the crisper cover: (see fig. # 8)
1. Slide the rear of the crisper cover into the track and carefully lower the
front into place.
2. Replace the crispers as previously instructed.
fig. # 8
10