Crisper And Crisper Cover; Crisper Humidity Control - Haier HRF08WNDWW Manual Del Usuario

Crisper and Crisper Cover

Crispers
HTV Series: This series of refrigerators has 2 opaque crispers for you to store food.
HTE Series: This series of refrigerators has 2 clear crispers for you to store food.
Crisper cover on both series is made of glass.
To remove and install the crisper: (see fig. # 9)
1. Slide crisper straight out to the stop.
2. Gently lift the front of the crisper.
3. Grip the crisper firmly and slide out completely.
4. Replace the crisper by placing the crisper properly
in its tracks and gently sliding it back into place.
To remove the crisper cover: (see fig. # 10)
1. First remove both crispers.
2. Gently push upward from the underside of the crisper cover to remove it from the
crisper cover frame.
3. Carefully grasp the crisper cover and slide out to remove.
4. Lift crisper cover frame up and remove.
To replace the crisper cover: (see fig. # 10)
1. Insert the rear of the crisper cover frame into the support bracket the side walls of
the refrigerator.
2. Lower the front of the crisper cover frame into place.
3. Slide the rear of the crisper cover into the frame and carefully lower the front into
place.
4. Replace the crispers as previously instructed.
Crisper Humidity Control: (see fig. # 11) (HTE Series Only)
Your refrigerator model may be equipped with slide control to raise or lower the
humidity levels of your crisper. This feature will increase the storage life of your
fruits and vegetables. Simply adjust the controls to the appropriate setting for the
items you are storing in the crispers.
English
fig. 9
fig. 10
10