Publicidad
6. Route the T-Connector ends containing the Green wire
to the right (passenger) side and out through the taillight
opening. Repeat step 4 using the T-Connector ends with the
Green wires.
Note: Avoid any areas that could could cut, burn or
pinch the T-Connector wires.
7. Confirm correct operation with a test light or by using a
trailer.
8. Return the taillight assemblies to their original positions
and secure with the fasteners removed in step 2. All loose
wires and the converter box should be secured using cable
ties (provided). Mount the trailer connector in a suitable
location near the center of the vehicle using an electrical box
or bracket (not included).
Publicidad
