Ariston AURES SLIM Manual Del Usuario página 7

For effective use
1. turn the water faucet (before inlet pipe) slowly until the lamps in the appliance switch "on". Wait
15-20 seconds until hot water starts to flow. for colder water, turns the faucet inscreasing the water
inflow gradually until you receive the desired water temperature. for hotter water, turns the faucet
inscreasing the water inflow.
2. heating setting:
off - Power is off
low - only the 1st heating element switches on (left light on)
Med - only the 2nd heating element switches on (right light on)
high - 1st and 2nd heating elements switch on, working together (both lights on)
3. ın Aures slıM floW model, the user can manage the temperature selecting heating konb and
regulating the water flow through water flow knob. the water flow knob allows to regulate the
water flow reaching the desired water temperature. turning left the water flow knob, the water flow
decrese and temperature inscrease. turning right the watr flow knob, the water flow increase and
temperature decrease. ın Aures slıM dısPlAY, in additional to Aures slıM floW, the user will
see visualized on the product the outlet water temperature
4. the spray outlet should be cleaned periodically by unscrewing it from the showerhead and clean
thoroughly. (fig.2, fig.4)
5. ın order to achieve maximum efficiency from the unit please grip the showerhead and twist it in
either direction to increased or decreased flow - 3 positions (fig.3).
for sink unit - ınstall open rings in summer and blind rings in winter (inner ring should
remain always open) (fig.4).
6. the unit operates automatically by opening the water faucet and shut off when closing the water
supply.
Clean periodically
Fig.2
3 Setting Spray
Fig.3
7
Sink
rings combination
summer
or 5kW & up
Winter
Fig.4