Tabla de contenido
Publicidad
8
Specifications
Pressure connections
Operating ranges and diff.
Adjustments
Ambient temp. limit
Electrical ratings
Pulsation plug
Locking plate and screw
Protection Class
Material
Accessories (see pag. 4)
Shipping weight
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond
these specifications, consult the local Johnson Controls office or representative. Johnson Controls shall not be liable for damages
resulting from misapplication or misuse of its products.
Johnson Controls International, Inc.
Headquarters:
Milwaukee, WI, USA
European Headquarters:
Brussels, Belgium
European Factories:
Lomagna (Italy), Leeuwarden (The Netherlands) and Essen (Germany)
Branch Offices:
Principal European Cities.
This document is subject to change
Catalogue Section 6
Style 5, 15, 28, 30 (see drawings)
See type number selection
See type number selection
-50 to +55 °C (+70 °C max. duration two hours)
-20 to 55°C for PED approved models
400 V ∼
contact A-C
contact A-B
contact A-D
–
230 V
12 W (pilot duty only)
Fitted into all HP bellows
To lock and seal range and/or differential screw.
Standard included on types P736LCW,MCB,MCS and PGB.
Optional on all other types (quantity orders only)
IP30
Case
Cover
Contact unit
Mounting bracket
Compression coupling
90 cm capillary with two flare nuts
90 cm flexible synthetic hose with two flare nuts
ind. pack
0.74 kg
{
-93xx
Ind. overpack
-97xx
Bulk pack
{
Ind. overpack
-94xx
-98xx
16(10) A
8(5) A
8(5) A
1,5 cold-rolled zinc plated steel
2 mm ABS plastic blue (RAL 5007)
Large copper-backed silver contacts
24 pcs. (18 kg)
24 pcs.
(16 kg)
16 pcs. (12kg)
P736
Issue 23/03/2004
www.johnsoncontrols.com
Printed in Europe
© 2004 Johnson Controls Inc
Order No. PD-P736-E
Publicidad
Tabla de contenido
