Hanging The Fan - LUCCI Air AIRFUSION SENSATION Manual De Instrucciones De Instalación

Airfusion Sensation Installation Instructions
1. Loose the ball joint (2) by removing the set screws (3).
2. Loose the bolt (6) and spring pin (9) from the downrod (4).
3. Feed the down rod (4) through the canopy (5).
4. Insert the motor wires (1) through the down rod and secure the ball joint back to the down rod.
5. Insert the down rod to the coupling (8); line up the coupling holes with the down rod holes then
insert and tighten the bolt (6). Then insert the spring pin (9) to the end of bolt.
6. Finally secure the down rod and the coupling by tightening the set screw (7) on the coupling (8).
Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is
positioned on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in
operation. (Fig.5)
7 | P a g e
INSTALLING THE DOWN ROD

HANGING THE FAN

Fig. 5
Fig. 4