Hanging The Fan - LUCCI Air AIRFUSION BALI Instrucciones De Instalación

AIRFUSION BALI Installation Instructions
INSTALLATION OF LAMP (Fig. 7)
• NOTE: The GX53 lamp is pre-installed in the light kit. Follow the below if it is required to replace the lamp.
• Remove the lamp shade from the light kit.
• Replace the GX53 lamp with a new one. Do not exceed the maximum power rating.
• Install the lamp shade back onto the light kit.
Fig. 7

HANGING THE FAN

Lift the fan assembly onto the mounting bracket. Ensure the key slot (A) of the hanger ball is positioned on
the key pin (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. (Fig. 8)
Fig. 8
9 | P a g e