Hanging The Fan; Blade Installation - LUCCI Air NAUTILUS Instrucciones De Instalación

Nautilus Fan Installation Instructions
•
Pass the power supply wires and ground wire (D) from the ceiling outlet box (B) through the grommet (C)
of the canopy cover (E).
•
Attach the mounting bracket (F) to the canopy cover (E).
•
Install the ceiling mounting bracket (F) and the canopy cover (E) on the outlet box (B) with the mounting
screws (H) provided with the outlet box and washers (G) provided with fan. Fig. 6
Fig. 6
Lift the fan assembly onto the mounting bracket. Ensure the key slot (A) of the hanger ball is positioned on
the key pin (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. Fig.7
BLADE ATTACHMENT
1. Before Installing the blades, remove the blade screws from the top of the fan motor.
2. Align the 2 holes on the blade with the 2 holes on the rotating member of the fan motor assembly using
2 blade screws in step 1, to secure the blade to the fan motor assembly.
Ensure all screws are tightened evenly to reduce the chance of warping or unbalancing. Take care not to
over tighten the screws, as this can damage the blades.
3. Once completed, repeat the process on the remaining blades.
5 | P a g e

HANGING THE FAN

BLADE INSTALLATION

Fig. 8
Fig. 7
V1.0 (09/2019)