Hanging The Fan; Installing The Fan; Blade Attachment - LUCCI Air AIRFUSION AIRLIE II Instrucciones De Instalación

Airlie II Fan Installation Instructions
Pass the power supply wires (C) from the ceiling outlet box (B) through the center of the ceiling mounting
bracket (D). Install the ceiling mounting bracket (D) on the outlet box (B) with the mounting screws (F)
provided with the outlet box and washers (E) provided with fan. Fig. 6
Fig. 6
Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is
positioned on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in
operation. Fig.7

Blade attachment

1. Remove the two screws (1) from the covering plate (2) on the top of the motor housing, and remove
the plate.
2. Insert the blade (4) into the square slot of the motor.
3. Secure the blade on the bracket by using 3 motor screws with washer (3), ensuring they are tightened
simultaneously.
4. Once completed, repeat the process on the remaining blades.
5. Replace the covering plate on top of the motor housing.
5 | P a g e

HANGING THE FAN

INSTALLING THE FAN

Fig. 7
Fig. 8
LD-AIRLIE II -52-/XX/01