Monitor Lcd Screen; Status Bar; Data Display - Hutchinson Technology InSpectra StO2 650 Manual Del Usuario

Monitor LCD Screen

InSpectra StO Tissue Oxygenation Monitor
™
2
LCD screen consists of three areas:
Status bar (top of the screen)
1
Data display (middle of the screen)
2
Menu bar (bottom of the screen)
3

Status Bar

The status bar at the top of the LCD screen can
display the following messages from left to right:
1
1 time
The hour clock is set at the factory to Central Standard
Time (CST).
Set time is a 24-hour clock in HH:MM (19:48).

NotE: To set the clock to local time, follow the
directions in the Set-Up Menu.
InSpectra Sto alarm Message
2
2
Alarm message is highlighted with flashing text on
a yellow background. A high or low InSpectra StO
Alarm will occur only if the InSpectra StO
Measurement extends beyond the user-determined
upper or lower limit.
to set upper and lower limits.
Sensor connected
3
The Sensor Connected message will show at all times
when the InSpectra
optical cable.

Data Display

See Patient Monitoring section, page 18.
12
How To Use
2
System
2
See InSpectra StO Alarm Menu section
2
StO Sensor is connected to the
™
2
1
2
3
3 4
4 Error Message
Error messages are highlighted in white text
on cyan background or black text on yellow
background.
Battery charge Indicator
5
The status of the battery charge shows when
operating on battery power.
2
figure 12.1
5
figure 12.2