Tools And Materials; Before You Begin - KALLISTA P72037 Guia De Instalacion

Tools and Materials

1/2" and 9/16" Pencil
Combination
Wrenches
Drill Square
Thank You For Choosing Kallista
Thank you for choosing Kallista. Please take a few minutes to review
this manual before you start installation. If you encounter any
installation or performance problems, please don't hesitate to contact
us from within the USA or Canada at 1-888-4-KALLISTA
(1-888-452-5547).

Before You Begin

CAUTION: Risk of product damage. Do not overtighten
connections. Overtightening may damage the product.
Observe all local plumbing codes.
Prior to installation, unpack the new lavatory and pedestal and
inspect them for damage.
Return the lavatory and pedestal to the protective cartons until
you are ready to install.
These instructions are for installing the lavatory to wood frame
construction. For other installations, provide suitable bracing and
fastening devices of sufficient size and strength.
The walls and floor must be square, plumb, and level.
Lavatory dimensions are nominal and conform to tolerances in
ASME A112.19.9 standards for non-vitreous ceramic plumbing
fixtures.
Kallista reserves the right to make revisions in the design of
products, as specified in the Price Book.
1036496-2-B
Level
Safety
Glasses
Pipe
Wrench
2
Tape
Measure
Kallista