Tools And Materials; Before You Begin - KALLISTA P72001 Manual Del Usuario

Thank You For Choosing Kallista
Thank you for choosing Kallista. Please take a few minutes to review
this manual before you start installation. If you encounter any
installation or performance problems, please don't hesitate to contact
us from with the USA or Canada at 1-888-4-KALLISTA
(1-888-452-5547).

Tools and Materials

Tape
Measure
Square
Level
Drill

Before You Begin

Observe all local plumbing codes.
Prior to installation, unpack the new lavatory and pedestal and
inspect them for damage.
Return the lavatory and pedestal to the protective cartons until
you are ready to install.
These instructions are for installing the lavatory to wood frame
construction. For other installations, provide suitable bracing and
fastening devices of sufficient size and strength.
The walls and floor must be square, plumb, and level.
Lavatory dimensions are nominal and conform to tolerances in
ASME A112.19.9 standards for non-vitreous ceramic plumbing
fixtures.
Kallista reserves the right to make revisions in the design of
products, as specified in the Price Book.
Your pedestal lavatory may not look exactly like the one pictured.
1008427-2-C
Adjustable
Safety
Wrench
Glasses
Pipe Socket Wrench
Wrench With Sockets
2
Pliers
Pencil
Kallista