Causes And Remedies - Soehnle 952 Serie Manual Del Usuario

4. FAULTS – CAUSES AND REMEDIES
If you are unable to correct the fault or if other error messages appear, please contact your
service partner.
For further information and documentation please refer to:
https://www.soehnle-professional.com/en/site/documents
Please visit the Customer Center of our website www.soehnle-professional.com and choose
Compact scales Basic at Downloads / Industrial scales / Compact scales.
www.soehnle-professional.com
DISPLAY
Underload: only dashes appear at the
bottom of the display field.
Overload: only dashes appear at the
top of the display field. Maximum
weighing range is exceeded.
Scales not stabilised when resetting.
REMEDY
Switch the scales off and then
on again. The zero point is reset
automatically.
Remove part of the weighed
goods from the scales, or
switch the scales off and then
on again. The zero point is reset
automatically.
Test the scales with a force
shunt.
18