Installation; Unpacking And Installation - Soehnle 6958 Instrucciones De Manejo

4. Installation

4.1 Unpacking and installation

Caution:
Do not pull on the load cell cable and connectors during installation, as this may damage the parts.
1. Remove the two platforms 1 & 2 with the same serial number from the boxes and align them as shown
below. Remember to unplug the two connection cables and plugs on each platform..
1
2. Lift platform 1 as shown below and plug the connection cable of platform 2 into the connection socket on
the terminal box of platform 1.
2
2
29