Features; Technical Specifications; Operating Instructions - Urrea GGI810 Manual De Usuario

FEATURES

9
4
1. Fuel cap
2. Handle
3. Switch de modo económico
4. Starter Handle
5. Salida CA
6. Salida CC
7. LED Indicator
8. USB port output
9. Gasoline Primer
10. ON/OFF Swit

TECHNICAL SPECIFICATIONS

OUTPUT POWER
MAXIMUM OUTPUT POWER
RATED NOMINAL CA
FREQUENCY
PHASES
DISPLACEMENT
(APPROX. RUN TIME AT 50%
LOAD
FUEL TANK CAPICITY
WEIGHT
* Continuous work time generating half of its
capacity with a full tank of fuel
18
2
1
6
5
3
7
8
GGI810
0.9 kW
1 kW
120 V~
60 Hz
1 ~
54cc
5,5 h
3 L
17 kg (37,4 lb)

OPERATING INSTRUCTIONS

MOTOR SWITCH
To turn the engine on and off.
Position the ignition switch in the following
way:
OFF: To turn off the engine.
ON: To start the engine.
MOTOR SWITCH
HANDLE ON
To start the engine, pull the starter handle until
resistance is felt, and then pull hard in the direc-
tion of the arrow, as shown below.
STARTER HANDLE
FUEL TANK VENT
The fuel tank cap is provided with a Ventilation
lever to seal the tank gas.
The ventilation lever must be in the ON position
for the engine to run.
When the engine is not in use, leave the ven-
tilation lever in the OFF position to reduce the
possibility of fuel leakage. Allow the engine to
cool well before turning the ventilation lever to
the OFF position.
VENTILATION LEVER
PRIMER
The primer is used to provide the proper start-
ing mixture when the engine is cold. It can be
VENTILATION LEVER